N&W Global Vending Snakky RY, Руководство по установке

Страница: 18 / 52

© by N&W GLOBAL VENDING S.p.A.
14
06 2007 294-00
SuRfiNg modE
The interaction between system and operator happens
through the following components:
Liquid Crystal Display (LCD), 2 lines x 16 characters.
-
External keypad configured via software with numeric
-
keys from 0 to 9, having with the following functions in
the in the filler and technician menus:
N
Umeric keys
1 to 7 are used to select directly a menu item by keying
in the corresponding number shown in the summary
tables included in the appendix to this manual.
N
ext meNU key
�
:
�
To move to the following menu option.
In the case of command management it varies the logic
status of data where required, or in the case of entering
numeric data it writes the value 0.
p
revioUs meNU key
�
:
�
is used to move to the previous menu option.
In the case of command management it varies the logic
status of data where required, or in the case of entering
numeric data it writes the value 8.
e
Nter key
�
:
�
To move from a menu to a sub-menu or to enter a
command.
e
xit key
�
:
�
is used to move from a sub-menu to the higher level
menu, or to exit from the current command.
fig. 17
fillER mENu
When pressing once the programming button (see fig.
18) located on the C.P.U. board, the machine goes into
“Filler menu” mode.
The display presents the first item of the “filler menu”
with a series of numbers next to it, identifying the level of
the current menu.
Press the confirm button
�
to access the menu.
Press the exit button
�
to return to the previous menu.
Buttons keys
�
and
�
scroll through the menu items.
if a menu is not enabled during programming, a
title is displayed in the function list but it cannot be
accessed.
p
rice bUttoN
�
Button
�
is used to access directly the price/selection
combination of time band 0, if the function is enabled in
the “Programming” menu.
Fig. 18
RS232 serial port 1-
Programming access button on the CPU 2-