NAMCO Vampire Night DX, Руководство оператора

Страница: 52 / 85

Page 51
6-2-3-2 Switch Test
1. Select “SWITCH TEST” on the ‘I/O Test’ screen to test the switches and
sensor. The following screen is displayed.
UP SELECT SW+ENTER SW:EXIT
SWITCH TEST
COIN 000
SERVICE OFF
TEST ON
UP SELECT OFF
DOWN SELECT OFF
ENTER OFF
START 1P BUTTON OFF
START 2P BUTTON OFF
GUN 1P TRIGGER OFF
GUN 2P TRIGGER OFF
SENSOR OFF
I/O TEST
Each time a coin is entered the COIN numbers will increase by one.
While a switch is pressed or the sensor is activated the corresponding display will
change from OFF to ON.
Press the UP Select switch and the Enter Switch together to return to the Main Menu
Screen.
Interruption sensor
The game cannot be played if the sensor is blocked by objects placed on top of the
Gun stand Assy.
A message appears on the screen if the sensor is interrupted during operation.
•
The message is displayed after coins are inserted if the sensor is blocked during
the attract mode.
•
The message is displayed during the game play if the sensor is blocked during
the game.
•
Even if the interruption sensor is defective, the game can still be played by
removing the sensor. However, the game cannot be played if objects are placed
on top of the Gun stand Assy (in front of the CCD camera), and no message is
displayed on the screen, disrupting normal operation. The sensor should be
replaced promptly.
CCD camera
(inside)
Interruption sensor
(inside)
Camera Assy