NAMCO CASINO WINNER Скачать руководство пользователя страница 76

Страница: 76 / 216

Page 76

6-6-5

Switch Test

This checks the operation of the switches

Select “SWITCH TEST” on the menu screen and press the Enter switch.
The following screen is displayed.

The display will change each time a switch is operated.

After the test for the selected item has been completed, select “EXIT” and
press the Enter switch to return to the I/O Menu screen.

(a)

Displays “ON”.

(b)

The indication changes from OFF to ON when the switch is operated up or

down.

(c)

Displays “ON” when the switch is pressed.

(d)

Displays “ON” when the switch is pressed.

UP SELECT SW

ENTER SW:EXIT

I/O TEST

SWITCH TEST

[ON:RED]

(a)

TEST ON

SELECT (UP/DOWN)

OFF/OFF

ENTER OFF

MULTI BUTTON

OFF

(b)

(c)

(d)

Содержание CASINO WINNER

























































































































































































































Результаты поиска

Содержание CASINO WINNER

Отзывы:

NAMCO CASINO WINNER, Руководство оператора, Страница: 76 / 216

Результаты поиска

Содержание CASINO WINNER

Отзывы: