NAMCO 90500135 Скачать руководство пользователя страница 85

Страница: 85 / 101

Page 85

Disconnect the connector.

Using needle nosed pliers, squeeze the locking tabs of the locking supports, one
at a time, to release the PC Board. Remove the Xenon PC Board.

Reassemble in reverse order.

Note: To prevent possible electrical damage, ensure that connectors are

refitted the correct way round.

In order to ensure the correct light output from the gun Assy, the
fibre-optic should be fitted as close as possible to the Xenon Tube.

When installing the fibre optic, be careful not to touch the Xenon tube
with your fingers or hands. If the Xenon tube is accidentally touched,
clean the area touched with alcohol. (Part No 95000031)

Holder

Xenon Tube

Xenon PC Board

Insert the Fibre Optic until

it comes in contact with

the stopper in the holder

and install it so that it is as

close as possible to the

Xenon Tube.

Fibre Optic

Locking Supports

Xenon PC Board

PC Board

Locking Support

Needle-Nosed
Pliers

Stopper

How to disengage
locking supports

Содержание 90500135






































































































Результаты поиска

Содержание 90500135

Отзывы:

NAMCO 90500135, Руководство оператора, Страница: 85 / 101

Результаты поиска

Содержание 90500135

Отзывы: