manualshive.com logo in svg

NAMCO 90500135, Руководство оператора, Страница: 82 / 101

Поделиться
Скачать
NAMCO 90500135 Скачать руководство пользователя страница 82

Page 82

7.

Disconnect the 2off Fast-on terminals from the Gun

 S

w

itc

h

8.

After removing the Gun Switch and Trigger, remove 1off self tapping screw
(M3x8) and detach the Gun Bracket.

9.

Remove the flange nut (M3) to remove the Pipe Clip and Sleeve.

10. Separate the Fibre Holder into two parts, and remove them from the Fibre-Optic.

Remove the Gun Harness Assy together with the O-ring, Fibre-Optic and Flexible
Hose.

11.

Reassemble in reverse order.

Fibre-Optic

O-Ring

Flexible Hose

Flange nut (M3)

Pipe Clip

Fibre holder

Gun
Harness Assy

Self tapping screw
(M3x8)

Sleeve
(M3x8)

Trigger

Gun Bracket

Gun Switch

Fast-On Terminals

Note: The tie wraps on the Gun Harness Assembly should be installed so that

they come in contact with the gun bracket, as shown in the diagram
below.

Note: Install the Fibre Optic Holder by aligning the marking on the holder with

the marking on the gun body (L).

 (see 8-14-2 page 79).

It is recommended that Threadlock, (part No 95000006), is applied to the
cap bolt (M3x20), cap bolt (M3x8), and 2off hex nut (M3) when
reassembling the gun harness assy

Tie Wrap

Gun Bracket

Содержание 90500135






































































































Отзывы:

Нет отзывов