A3LA-R-MIL-MOD User Guide Version B
Document Number: 451-93156-001A
117 of 159
B.118 +CPWD
–
C
HANGE
P
ASSWORD
Exec Command: +CPWD=<fac>,<oldpwd>,<newpwd>
This command sets a new password for the facility lock function defined by the AT
command Facility Lock +CLCK. The following parameter values are currently
supported:
<fac>:
“CS” CNTRL Surface (Phone Unlock Code)
“SC” SIM (SIM Card PIN Code)
“P2” SIM PIN2 (SIM Card PIN2 Code)
“AB” Call Barring password (single password used for all call barring
supplementary services)
Note: AT+CPWD=”SC”,<oldpwd>,<newpwd> will return “Error” unless the SIM Card
Pin Code is currently activated (see AT command Facility Lock +CLCK).
Note: A user interface may prompt the user for two copies of the new password, in
which case it should check the two are identical as only one copy is needed for this
command.
Test Command: +CPWD=?
Test command returns a list of pairs which present the available facilities and the
maximum length of their password. Response is in the form:
+CPWD: list of supported (<fac>,<pwdlength>)s
where <pwdlength> indicates the maximum length for the password.
Note: +CPWD is closely related to +CLCK and +CPIN. See these commands for
additional information.
B.119 +CSDT
–
S
IDETONE
Exec Command: +CSDT=<sidetone enabled>
This command controls the A3LA-R RF board sidetone generation. Enabling sidetone
will cause the A3LA-R to start sidetone generation. Disabling sidetone will cause the