Model Code
NK-125MA
Suitable Blade
115-125mm T1.5-2.2mm Diamond Blades.
Cut Depth
5-25mm (125mm Blade) 5-20mm (115mm Blade)
Weight
680g (Main Unit with adaptor system)
Work material
Concrete, Block, and Tile.
Suitable
Makita / BOSCH / Dewalt / Milwaukee / Metabo / HiKOKI / FLEX 115-125mm class small angle grinder.
Angle Grinders
Dust Extractor for 115-125mm Diamond Blade
INSTRUCTION MANUAL
WARNING
SPECIFICATIONS
N300289
INSTALLATION
-1-
・
DO NOT use NK-125MA with the angle grinder which can NOT be fitted correctly as instructed in this manual.
・
NK-125MA is only for cutting concrete, block, and tile. DO NOT use for cutting steel or other materials.
・
NK-125MA must be used with the Vacuum suitable for the concrete dust.
・
NK-125MA is only for 115-125mm Diamond cutting blades. DO NOT use with abrasive wheels or tipped saw blades.
・
Always check NK-125MA for damage, cracks, or deformation before use.
・
DO NOT use NK-125MA if it is cracked, damaged or bent as this could lead to injury.
・
Be sure to wear the protective goggles, dust mask, protective foot wear, earplugs and other protective equipment when working.
・
Keep NK-125MA away from gasoline, solvents, and paraffin.
・
Ensure the cutting material securely clamped before cutting.
[a] Main Unit / [b] Adapting Unit / [c] Bolt / [d] Wrench / [e] Offset Plate / [ f ] Milwaukee Plate
[g] Base Flange / [h] Spacer T9.5 / [ i ] Spacer T7 / [k] Spacer T6 / [m] Joint / [n] C-mode set / [p] Screw set
Explanation
of the pictograms.
Read the operating
instructions before use.
Wear
eye protection.
Wear
breathing protection.
Wear
ear protection.
Wear
protective gloves.
General
Warning.
OVER VIEW
NK-125MA
Guard
Grinder
※
Based on the web
as of 2022 Jan.
Metabo
WEPBA17-125 / WEBA17-125 / WEA17-125 /
WEVA15-125 / WA13-125 / WEA11-125 series type
HiKOKI
G13SB4, G13SE3, G13BAWQZ, G13BY, G13YG type
Sub Plate
is required
separately.
WEPBA17-125 / WEBA17-125 / WEA17-125 /
WEVA15-125 / WA13-125 / WEA11-125 series type
Sub Plate
Sold Separately
G13SB4, G13SE3, G13BAWQZ, G13BY, G13YG
type
Large Flange
is required separately for
the "Large Flange" models
on the right.
Makita / BOSCH :
X-LOCK
series type
Dewalt :
D28137/ DCG405FN
type
Milwaukee :
HD18
series type
HiKOKI :
G13SE2/G13YC2/G13VA
series type
[a]
[b]
[c]
[d]
[g]
[h]
[ i ]
[k]
[e]
[n]
[p]
[m]
Separate [a] and [b].
can NOT
be fitted.
[ f ]
Check the
Installation Guide.
Check the instruction
video at this QR code.
[p]
[p]
series, GA5050R type
1. Detach the Guard from the grinder.
DWE4056 / 4057, DCG405P2 / 406N /
409NT / 416N series type
WPB18LTXBL125 / WB18LTXBL125 /
WP18LTX125 / W18LTX125 / WEV1500-
125 / WE1500-125 series type
DCG405P2 /
406N / 409NT /
416N series
type only.
Above grinder needs its lever and related components detached.
