Model Code
NK-230
Suitable Blade
180-230mm / T2-3mm Diamond Blades.
Cut Depth
5-60mm (230mm Blade)
Weight
2.2kg (Main Unit with adaptor system)
Cut material
Concrete, Block, Tile, …etc.
Suitable
BOSCH
Angle Grinders
MAKITA
HiKOKI
Milwaukee
DEWALT
Metabo
FLEX
L21-6 230, L24-6 230, L26-6 230
GWS24-230JVX, GWS26-230JH, GWS26-230JBV, GWS26-230LVI
GWS20-230H, GWS22-230H, GWS22-230JH, GWS22-230LV, GWS24-230H, GWS24-230JH, GWS24-230BV, GWS24-230LVI,
GA9020 / 9030 / 9040 series.
G23MRU, G23UBY, G23SEY, G23SCY, G23SC3, G23SR, G23SRU, G23SW2, G23SWU, G23UC, G23UCY, G23UDY
AG22-230, AG22-230E
DWE494, DWE490, DWE492, D-28490, D-28492, D-28498, DWE4559, DWE4579, DWE4599
WE24-230MVT, W22-230MVT, WE22-230MVT, W24-230MVT, W26-230MVT, WE26-230MVT, WX22-230, W24-230
NK-230 Dust Extractor
INSTRUCTION MANUAL
WARNING
SPECIFICATIONS
N300221-Rev6
[a]
[c]
[d]
[e]
[ f ]
[g]
[h]
[ i ]
[k]
[r]
[n] [o]
[p]
[q]
PREPARATION
Metabo / Dewalt DWE4579 type
[b]
Fig.2
Fig.1
1.
[Metabo / Dewalt DWE4579 type]
Remove the Lever unit and O-ring
(WX22-230 and W24-230 only) , then
set [b] Mount Ring on the Gear Case.
(Fig.2)
2.
Set [c] Adaptor around the Gear
Case with the Hooks securely stored
into the groove at Gear Case.
(Fig.3)
* Exchange the bottom plate of [c] into [s]
when using Dewalt DW4579 type.
Gear Case
-1-
Fig.3
Groove
Gear Case
・
DO NOT use the DUST TANK with the angle grinder which can NOT be fitted correctly instructed by this manual.
・
DUST TANK is only for cutting concrete, block, and tile. DO NOT use for cutting steel or other materials.
・
DUST TANK must be used with the Vacuum suitable for the concrete dust.
・
DUST TANK is only for Diamond cutting blades. DO NOT use with abrasive wheels or tipped saw blades.
・
Always check the DUST TANK for damage, cracks, or deformation before use.
・
DO NOT use the DUST TANK if it is cracked, damaged or bent as this could lead to injury.
・
Be sure to wear the protective goggles, dust mask, protective foot wear, earplugs and other protective equipment when working.
・
Keep DUST TANK away from gasoline, solvents, and paraffin.
・
Ensure the cutting material securely clamped before cutting.
[a] Main Unit / [b] Mount Ring / [c] Adaptor / [d] Centering Holder / [e] Flange Bolt / [f] Base Flange
[g] Spacer T3.4 / [h] Spacer T6.0 / [ i ] Spacer T7.5 / [k] Spacer T9.4 / [m] Spacer T10.6
[n] Bolt (L60) / [o] Bolt (L45) / [p] Hex Wrench / [q] Swing Duct / [r] Vacuum Joint / [s] DW plate
Explanation
of the pictograms.
Read the operating
instructions before use.
Wear
eye protection.
Wear
breathing protection.
Wear
ear protection.
Wear
protective gloves.
General
Warning.
OVER VIEW
[b]
[m]
Remove Lever unit & O-ring.
(WX22-230 & W24-230 only)
Hook
[c]
[s]
Exchange to [s]
(DWE4579 type only)
