15
NAISHKITES.COM
V - CONTROL SYSTEM BAR
1) ADJUSTING FUSION BAR STEERING (REAR) FLYING LINES
1) Locking Cavity
2) Locking Recess
3) Adjusting Cavity
Repositioning the knots found inside the bar/line
adjuster changes the length of the steering (rear)
flying lines.
Knot A:
Decreases the length of the steering (rear)
flying lines.
Knot B:
Naish Control Systems are delivered in the
Knot B position.
Knot C:
Increases the length of the steering (rear)
flying lines.
Knot D:
Securing knot for the Knot C position.
WARNING:
Do not use Knot D position in the
locking cavity.
2
B
1
A
3
C
D
A) Pull the bar/line adjuster out from the bar end.
B) Pull the end of leader line out from the adjusting
cavity (3).
C) Pull the knot out of the locking recess (2).
D) Pull the leader line out through the bottom of the
adjusting cavity (3).
