12
NAISHKITES.COM
IV - Assembly
1) ATTACHING FLYING LINES TO A 4-LINE KITE
A) Begin with the flying lines from the 4-line
control system laid out directly upwind of the kite.
WARNING: Make sure all flying lines are
straight, completely free of tangles and
properly positioned for correct line connection
before attaching them to the kite.
All Naish Control Systems are delivered
assembled and ready to use.
B) Place the front and rear line connection points
outside of the leading edge and make sure they are
free of tangles and knots.
C) Attach both front flying lines to the front line
connection points.
D) Attach the left steering (rear) flying line to the left
steering (rear) line connection point.
E) Attach the right steering (rear) flying line to the right
steering (rear) line connection point.
WARNING:
Naish flying lines and bridles feature foolproof connectors to reduce the risk of incorrect connection
between front and steering (rear) line connection points. Be sure to always use authentic Naish flying lines and
bridles when using Naish kites and control systems.
Steering
(Rear)
Steering
(Rear)
Front
Front
ATTACHING FOOLPROOF CONNECTORS
A) To create a Lark's head loop,
fold the loop over and pull the line
through the loop as shown.
B) Insert the knotted end of the
other line through the Lark's
head loop as shown.
C) Pull the lines tight to secure
the connection as shown.
