The Statement amplifiers can be operated using either their top panel controls or using the
Statement remote control handset. The remote control handset is illustrated and annotated
in Diagram 5.6.
To wake the NAC S1 or NAP S1 from standby mode press the top panel standby button or handset
standby key. Both the NAC S1 and NAP S1 will take a little time to wake from standby.
N O T E . If the NAC S1 and NAP S1 are connected via CAN bus, standby and illumination
control will be integrated.
5 . 1
I N P U T S E L E C T I O N
NAC S1 inputs can be selected either by using the top panel input button or the handset input
keys. The top panel input button scrolls through the inputs in the following order: cd, stream,
av, phono and aux. The handset input– and input+ keys scroll through the inputs in each direction.
The selected input will display across the NAC S1 input display.
N O T E . If on changing inputs you often find it necessary to alter the volume, you can adjust the gain
independently on each input to compensate for different source output levels. Adjusting input gain is
described in Section 4.2.
5 . 2
V O L U M E C O N T R O L
NAC S1 volume can be adjusted using either the top panel volume control or the handset vol–
or vol+ keys. The volume level will display on the NAC S1 volume display.
N O T E . The top panel volume control does not rotate in response to handset volume commands.
N O T E . If the NAC S1 is operating in Unity Gain mode, the far right volume display indicator will
illuminate.
For silence press the NAC S1 top panel mute button or handset mute key.
N O T E . Mute is indicated by the far left volume display indicator illuminating and the volume control
display dimming.
5 . 0 N A C S 1 A N D N A P S 1 O P E R A T I O N
2 8
2 9
