background image

 

Naim Audio HDX Hard Disk Player – Network Setup 

4 September 2008 

 

Page 13 of 14 

Glossary 

• 

Auto IP Address

 – The address the HDX will revert to if it is in DHCP mode and there is 

no DHCP server. 

 

• 

DHCP addressing mode

 – in this mode the DHCP server automatically allocates the IP 

addresses to the HDX. 

 

• 

DHCP  address  pool

  –  The  address  pool  is  the  range  of  addresses  used  by  the  DHCP 

server when allocating IP addresses to devices on the network. The current DHCP pool 
settings can usually be determined by checking the Modem/Router configuration. 

 

• 

DHCP  server 

–  This  allocates  the  IP  addresses  to  the  devices  on  the  network.  In  a 

typical home setup the DHCP server is built into the Modem/Router. 

 

• 

DNS

–  The  Domain  Naim  System  is  a  system  of  converting  a  domain  name  (e.g. 

www.naimaudio.com

) to an IP address. When accessing the Internet the DNS service 

is  usually  provided  by  the  ISP.  The  local  DNS  server  in  the  Mode/Router  performs  the 
same function but on the local network. For example it allows the user to type the HDX 
name into a web browser (e.g. 

http://NSHDX1234/

) and it translates the HDX name to 

the correct IP address. 

 

• 

Firewall  (software)

  –  A  software  firewall  runs  on  a  computer  and  prevents  unwanted 

intrusions  from  other  computers.  Microsoft  Windows  XP  and  Vista  are  both  supplied 
with  software  firewalls.  Normally  Windows  will  advise  if  these  are  not  enabled.  
Examples  of  other  software  firewall  vendors  are  ZoneAlarm,  Norton  and  Eset.  It  is 
recommended to always run a software firewall on any computer connected to the 
Internet.

 

 

• 

Firewall (hardware)

 – Most Modem/Routers have a build in firewall, often known as a 

hardware firewall. These prevent unwanted intrusions from computers on the Internet 
by  stopping  any  incoming  communication  not  initiated  from  the  local  network.  A 
hardware firewall is not a substitute for a software firewall and it is recommended that 
both are always used together.

 

 

• 

Gateway – 

This  is  the  IP  address  that  the  HDX  uses  to  access the  Internet.  In  a  home 

network this is often the same IP address as the Modem/Router 

 

• 

IP Address

 – This is the unique address of a device on a network. The HDX has two IP 

addresses. One for the Main Controller and one for the Front Display Controller. 

 

• 

ISP

  –  The  Internet  Service  Provider  is  the  company  that  provides  the  Internet 

connection to the home. 

 

• 

Static addressing mode

 – in this mode the user manually allocates the IP addresses to 

the  HDX.  This  method  is  more  complicated  than  DHCP  and  should  only  be  used  if  it 
has been determined that static addressing mode is necessary. 

 

• 

LAN

  –  The  Local  Area  Network  is  the  home  network  that  is  ‘behind’  the 

Modem/Router. 

 

Содержание HDX - REMOTE CONTROL CODE















Отзывы: