2 X 250W Continuous Power at 8 and 4 Ohms
>500W Dynamic Power, 22A Peak Current
<0.004% THD 20Hz – 20kHz from 500mW to 250W
>120dB Dynamic Range
40uV Residual Noise
>2000 Damping Factor at 50Hz
+0/-0.5dB Frequency Response 20Hz – 20kHz, -3dB >85kHz
Channel Separation >90dB @ 1kHz, >80dB @ 10kHz
FEATURES
Digital PowerDrive
Digital Soft Clipping (switchable)
5 Position Digital Impedance Compensation Filter
Remote Control
CONNECTIVITY
Analogue
A/D Conversion for Analogue Inputs
Multi-bit Delta/Sigma 24/192kHz
0.0004% THD
124dB S/N Ratio
High Resolution 120dB Digital Attenuator
Digital
Inputs Digital SPDIF: AES/EBU, Coaxial X 2, Optical X 2
Inputs Analogue: Balanced, Single Ended
Processor Loop: SPDIF Optical (Mac compatible)
Rear Panel
2 Sets of Speaker Binding Posts to facilitate Bi-wiring
RS-232 serial data port
IR Input
12V Trigger Input and Output
GENERAL
Standby Consumption
Amplifier Efficiency
Power Requirements
Unit Dimension (W x H x D) Gross*
Net weight
Shipping weight
M2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1W
90%
100 - 240V AC 50/60 Hz
435 x 148 x 502mm
20.2kg
25.6 kg
Features and Specifications
NAD Electronics International reserves the right to change specifications or features without notice. NAD is a registered trademark of NAD Electronics
International. All rights reserved. No part of this publication may be reproduced, stored, or transmitted in any form whatsoever without the written
permission of NAD Electronics International. © 12/09 NAD Electronics International.
www.NADelectronics.com
*Gross dimensions include feet, extended buttons and rear panel terminals. Note: Installers should allow a minimum clearance of 55mm for wire/cable management.
435.00 mm
14
8.
00 m
m
501.68 mm
