ENGLISH
7
10 FUSE HOLDER
•
In the unlikely event a fuse needs to be replaced, unplug the
AC power cord from the mains power outlet. Then, remove all
connections from the amplifier. Use a flathead screwdriver or similar
to open the fuse holder via the slot located at the top edge of
the fuse holder. With the screwdriver in place, push it outward to
unlatch and open the fuse holder.
•
Only replace the fuse with the same type, size, and specification –
T10AL 250V.
IMPORTANT NOTICE
Do not use any substitute fuse of different type, rating or value. Failure to
observe this precaution may cause damage to the amplifier circuits and
may create a fire hazard and/or defeat the safety built into the amplifier
and may void the warranty.
11 AC MAINS INPUT
•
The CI 8-120 comes supplied with two separate AC power cords.
Select the AC power cord appropriate for your region.
•
Before connecting the AC power cord plug to the mains power
source, ensure that it is firmly connected to CI 8-120’s AC Mains
input socket first.
•
Always disconnect the AC power plug from the mains power source
first, before disconnecting the other end of the AC power plug from
the CI 8-120’s AC Mains input socket.
IDENTIFICATION OF CONTROLS
