ENGLISH
5
IDENTIFICATION OF CONTROLS
1 POWER BUTTON
•
All eight LINE INPUT LED indicators will turn red for about 10
seconds, briefly all blue and then blue for those LINE INPUT
channels with active line input signal or no light (except Standby
LED) in the absence of any active line input signal. The 10 seconds
delay in powering up is intended for system power stability and
security self-check.
•
Pressing the Power button again turns the unit back to standby
mode. The Standby LED indicator will turn from blue to amber.
NOTE
“Power Mode” (Settings - Power Settings - Power Mode) must be set to
“Power Button” for the unit to power up via front panel Power button.
2 STANDBY LED
•
This indicator will light up amber when CI 8-120 is at standby mode.
When CI 8-120 is powered up from standby mode, this indicator will
illuminate blue.
STANDBY AND LINE INPUT LED STATUS INDICATORS
DESCRIPTION
STANDBY LED STATUS
LINE INPUT LED 1-8
STATUS
Operating mode
Blue
Corresponding Line Input
LED indicator is solid blue
with active line input
signal or no light in the
absence of any active line
input signal.
Standby mode
Amber
Off, no light
System reboot
Flashing amber
Off, no light
Overvoltage or under
voltage
Red
Off, no light
AMP current error
Red
Corresponding channel
LED is red.
AMP DC error
Red
Corresponding channel
LED is red.
Power module error
Flashing red
Off, no light
3 LINE INPUT (1 – 8) LED INDICATORS
•
LINE INPUT channels with active source or input signal will
have their corresponding front panel LINE INPUT LED indicators
illuminated in blue.
•
If there is no active source or input signal connected to a particular
LINE INPUT, the corresponding front panel LINE INPUT LED indicator
will not light up.
IMPORTANT NOTICE
If the selected source is GLOBAL A and/or GLOBAL B and there is an
active source or input signal at either GLOBAL input terminal, all eight
LINE INPUT LED indicators will illuminate at the same time.
4 GLOBAL A, GLOBAL B IN/OUT
•
These IN/OUT terminals are dedicated only to GLOBAL settings.
•
Configure GLOBAL A/GLOBAL B via the INPUT/OUTPUT menu of the
web-based CI 8-120 User Interface.
GLOBAL A IN, GLOBAL B IN
•
Use RCA-to-RCA leads to connect Audio Output terminals from
compatible external devices such as preamplifiers, processors or other
applicable devices to GLOBAL A IN and/or GLOBAL B IN terminals.
•
If GLOBAL A and/or GLOBAL B are turned ON in the web-based
CI 8-120 User Interface, the source(s) connected to GLOBAL IN
terminals will become the active input defeating all other active line
input channels.
•
GLOBAL A takes priority over GLOBAL B.
GLOBAL A OUT, GLOBAL B OUT
•
Use RCA-to-RCA leads to connect GLOBAL A and/or GLOBAL B OUT
terminals to audio INPUT terminals of compatible external devices
such as amplifiers, receivers or other applicable devices.
•
The GLOBAL OUT terminals are line level “loop through” output. The
same level of input signal from corresponding GLOBAL IN is available at
the corresponding GLOBAL OUT terminal thereby allowing the same
signal to be shared or passed on to another amplifier.
•
At standby mode, line level “loop through” output at GLOBAL A
OUT and GLOBAL B OUT terminals remain available as long as the
sources for GLOBAL A IN and GLOBAL B IN are active.
ATTENTION!
Please ensure that the CI 8-120 is powered off or unplugged from the mains power outlet before making any connections. It is also advisable to power
down or unplug all associated components while making or breaking any signal or AC power connections.
© NAD CI 8-120 DSP
1
2
© NAD CI 8-120 DSP
4
6
7
8
9 10 11
3
3
5
