8
This operation is particularly useful in case there are not drain hole on hard floor in the
nearby.
To vacuum the liquid, proceed as follows:
1. Connect the machine to the floor tool, using the vacuum hose.
2. Switch on the vacuum motor.
NOTE:
The capacity of the recovery tank is enough to vacuum all the liquid previously
sprayed with a full tank of the clean water tank. After vacuuming the residual liquid, do not
re-fill the clean water tank before draining the recovery tank. Furthermore, avoid to vacuum
liquid not sprayed by the same machine, but for example by other sources. In this case in
fact the quantity of water vacuumed into the recovery tank could be excessive for its
capacity. If this should happen, check often the level of the recovery tank.
STEP D
– Washing hard floor with the injection-extraction system
Using the hard floor accessory supplied with the machine, it is possible to wash hard floor
injecting clean water and chemical, or clean water only, and vacuuming. In this way, hard
floor is perfectly cleaned and dried.
1. Connect the hard floor accessory to the machine using the vacuum hose and the
spray hose.
2. Act on the control panel to spray water and chemical or water only.
3. Spray on hard floor, pressing the lever situated on the handle. It is possible to brush
hard floor thanks to the bristle brush situated below the vacuum head.
4. Vacuum the liquid with the hard floor accessory
According to the hard floor dirt degree, it is possible injecting water and vacuuming
simultaneously, or injecting, brushing and vacuuming afterwards.
Optional accessories
With optional accessories, it is possible to use Eveline-Battery also to clean carpet, rugs,
upholstery and inside of cars.