NAC Image Technology ST-839, Руководство пользователя

Страница: 70 / 370

Memory Backup
Memory Backup
The Memrecam HX-7 has a built-in battery that retains the recorded images in memory in the
event of a loss in power to the camera for up to 1 hour.
3-24
(00400)
■ The recorded images may be lost when you turn off the power to the camera if the built-in
battery is not charged enough.
■ The memory backup is a supplementary function to prevent losing images by an accidental
power failure. We strongly recommend you save the images before turning off the power.
（

A
3-37 ）
■ Enable Memory Backup
After using the trigger input to switch to the REC mode, it automatically switches to the STOP mode upon
completion of recording. Once recording begins, the memory backup function is enabled, and the image
recording immediately before can be saved by the power supplied from the AC adapter or the internal backup
battery (hereafter, ‘battery’), even if the power to the main unit is turned OFF during recording. If there is
no power supplied from the AC adapter, it switches to memory backup by the battery.
While the Memory Backup is valid, a status LED of MEM BACKUP turns on or blinks as follows.
Lit Green: Memory Backup is valid
(by AC adapter plus built-in battery)

The MEM BACKUP LED turns on while the Memory Backup is valid by the AC
adapter plus built-in battery.

When the MEM BACKUP LED turns on if there are the recorded images in the
memory.

Charge: High
Flashing Green: Memory Backup is valid
(by built-in battery only)

MEM BACKUP LED flashes on and off while Memory Backup is valid in the
built-in battery.

Charge: High
Lit Orange: Memory Backup is valid
(by AC adapter plus built-in battery)

Charge: Medium
Memory Backup Status LED