NAC Image Technology ST-839, Руководство пользователя

Страница: 166 / 370

Select the Exposure Timing
Select the Exposure Timing
Select a compatible exposure timing to perform recording synchronized with current products (fx
series).
4-68
(00400)
■ Select the Exposure Timing Compatible to K4 and K3
The sensor exposure timing for exposure start signals varies between the MEMRECAM HX and GX series and
the previous MEMRECAM series (fx, ci series). If performing synchronized recording between cameras from
the MEMRECAM HX, GX series and the previous MEMRECAM series, all of the camera exposure times must
match.
１
Access the SYS MENU
(

A
3-11)

Access TOP MENU ＞ SYS MENU from the STOP mode.
２
Select EXP TIME with the up/down arrows
• Use the up/down arrows to move to the
selected item (reverse display) and select
EXP TIME.
３
Use the left/right arrows to select the exposure timing
• Use the left/right arrows to select the exposure timing.
• GXnative: Start exposure when the exposure start signals begin
• K3compat: Exposure ends when the recording synchronization signals
start
(if synchronized recording with cameras other than fx-K4 or K5)
• K4compat: Exposure ends when the recording synchronization signals
start
(if synchronized recording with fx-K4 or K5)
■ In the following cases, the exposure timing automatically switches to GXnative.
■ If the time synchronization setting (SYNC TIME) is “trigger RESET”.
■ If the frame straddling setting (STRADDL) is ON.

Read the HXLink users guide for synchronized recording with multiple camera connections
between the MEMRECAM HX series and other MEMRECAM series.