NAC Image Technology ST-839, Руководство пользователя

Страница: 140 / 370

Select the Recording Method
Select the Recording Method
In addition to normal recording, other recording methods include burst recording, multi trigger
recording and event recording.
If recording in recorded areas partitioned into segments, continuous recording is possible by auto switching
segments after recording.
4-42
(00400)
• The J-PAD3 REC MODE is displayed as REC METH on some J-PAD3 versions.
In addition to the recording method with the normal trigger input, the MEMRECAM HX-7 enables selection of
the following recording method.

Normal Recording Method: Method of recording images to the corresponding memory segment for a single
trigger input

Event Recording Method: Recording method where the first trigger input operates the recording trigger
in the same manner as the normal recording method, but the external
input/output trigger signals for the second and subsequent times are
considered an event

Burst Recording Method: Method of recording only the frames for the time frame enabled by the
external input/output trigger to the memory.

Multi Trigger Recording: Method:Method of recording multiple events by partitioning a single segment
into a maximum of 16 equally sized blocks

Multi MANUALRecording ： Method designating the number of frames per block and successively
photographing images repeatedly generated

LINEAR Recording Method Photographic method controlling the number of frames to the segment for the
recorded time with “Pause” and “Play” using the J-PAD3 button input

External input/output trigger input is required for using the burst or event recording methods.
(With the event recording method, only the first recording trigger, the trigger can be input
from the J-PAD3)

External input/output trigger input (

A
4-48)
Recording Method