MYXfitness MYX II, Руководство по эксплуатации продукта, Страница: 15 / 23

15
Heart Rate Monitor Setup
CHARG E BAT TERY
A red light indicates your heart rate monitor needs to
be charged.
1. Place the OH1 sensor into the USBA adapter so
that the metal contacts meet.
2. Insert the adapter into the dongle, then plug the
small end into the USBC port at rear of the tablet.
Check for the orange light which indicates the USB
has been inserted correctly. For MYX II, insert the
adapter into the dongle.
A flashing yellow light indicates it is charging. A green
light indicates that it is fully charged.
USING YOUR HE ART R ATE MONITOR
1. Remove the sensor from the charging adaptor,
and place it in the holder on the arm band so the
sensing side is exposed.
2. Put the arm band on your upper forearm or bicep
so that the sensor touches your skin.
3. Press the silver button once to turn on. A blinking
green light means it has detected your heartbeat.
4. Choose a workout on the MYX tablet. At the top
right of the workout details screen, choose Tap
to Pair “HR Monitor”. Your heart rate monitor can
also be paired by pressing the heart-shaped icon
during a workout.
5. After your workout, press and hold the OH1 button
to turn off the heart rate monitor.
Please consult your physician before engaging in
heart rate training, especially if you are pregnant, are younger
than 18 years old, have any underlying medical conditions, or
are unsure about pushing your heart rate to the max. If you
are younger than 18 years old, please also get your parent or
guardian’s permission before beginning.
1
2
1
3
(MY X II ON LY )
FOR MY X I , PLUG ADAP TE R
DI R EC TLY I NTO TH E TAB LET