v e r . 3 z d n i a 1 8 . 0 5 . 2 0 2 0
P e g a z
27
contact the Seller and the Manufacturer in order to receive the missing elements or replace the product
with a new, fully complete and functional one.
The multi-functionality and very rich equipment of the Pegaz wheelchair allows you to adjust the
stroller to your personal requirements. To do this, read the entire instructions carefully before use.
No tools are required to assemble and disassemble the Pegaz stroller.
14.
Assembly and disassembly of the stroller
Stroller assembly.
The product pre-packed in the original box is already pre-assembled. Complete the
installation by completing the following steps:
• unfold the stroller frame by adjusting the parameters: lower and stiffen the spreaders at the height of
the backrest in the rear of the stroller and at the height of the shopping basket in the front of the stroller.
• activate / dea
ctivate the front direction lock
• adjust the height and angle of the handle to push the trolley
• set the angle of the backrest
• adjust the length of the five
-point belts
• put on a footrest at the desired height
• put on a safety barrier or a therapy
table
• install appropriate equipment and adjust parameters, for example
:
o
put narrowing inserts
o
remove / install the extension on the backrest
o
set the seat depth
o
adjust the abduction and stabilizing belts
o
adjust the canopy with the window
o
install and adjust the wedge
o
set up a shopping basket
o
put on selected items of equipment dedicated to the seasons:
- sleeping bag for the legs
- mosquito net
- raincover
- umbrella
•
Dismantling the stroller
To disassemble the stroller:
a) Remove accessories
b) Remove the footrest
c) Remove the safety barrier / therapy table
d) Block the front wheels
e) Apply the brakes to the rear wheels
f) Raise the struts at the height of the backrest in the rear of the stroller and at the height of the
shopping basket in the front of the stroller
g) Fold in the truck, closing it with the transport lock
