MyWam Grizzly Скачать руководство пользователя страница 8

Страница: 8 / 59

G r i z z l y

v e r . 2 0 1 8 - 0 7 - 0 2

3.17. CAUTION! In the event of a medical incident involving the presence of a Grizzly rehab buggy, you must

immediately notify the Manufacturer in writing, either by registered letter or by e-mail with acknowledgment of

receipt, using the following addresses:

3.17.1. Postal address: MyWam sp.j., ul. Szczecińska 10, 41-516 Chorzów, Poland

3.17.2. E-mail address: [email protected]

3.18. The therapeutic seat is not suitable for children under 6 months.

3.19. It is forbidden to use the rehab buggy as a ladder or a base for climbing it to reach higher.

3.20. It is forbidden to use the rehab buggy in a way that the rehab buggy is not designed for.

in particular regarding the construction and regulation

3.21.1. WARNING!

Any regulation of the rehab buggy and its components, any settings, changes,

attachments and other adjustments to the rehab buggy must be carried out WITHOUT THE CHILD placed

in the rehab buggy. 3.21.2. Failure to do so may cause serious harm to the child or to others!

3.22. WARNING!

Adjustments performed in the rehab buggy, made in an incorrect manner or not in

accordance with the instructions in this manual are dangerous for the child and others!

3.23.1. WARNING!

Due to the great adjustability of the rehab buggy, when adjusting the angle of the seat

and adjusting the angle of the backrest, it is possible to set a position where the head of the child is below

the ilial line. 3.23.2. It is forbidden to use such a position, as this could lead to the risk of relishing or choking.

3.24. WARNING!

The Grizzly Bear decorative set (accessories) is gentle and caution must be undertaken

to ensure that the child does not damage its hair and does not put it in the mouth as this can cause the

baby to relish!

3.25. WARNING! Any alteration in the tilt of the seat causes a change in the overall center of gravity, which affects the

stability of the rehab buggy.

3.26. WARNING! Any alteration in the backrest tilt changes the overall center of gravity, which affects the stability of

the rehab buggy.

3.27. WARNING! Any change in the backrest tilt requires re-adjustment of the length of the five-point harness!

3.28. WARNING! The central brake is not intended to slow the rehab buggy in motion and must only be used to

immobilize the rehab buggy.

3.29. The front swiveling wheels, if the lock for the direction of movement is disabled, may vibrate at uneven surfaces

and lead to a sudden stop of the rehab buggy and its tipping over. Therefore, in the case of uneven surfaces, it is

advisable to lock the direction of movement of the front wheels and push the rehab buggy at a reduced speed.

3.30. All regulations and adjustments should be made under the supervision and care of a physician and

physiotherapist.

in particular regarding assembly and disassembly

3.31. CAUTION!

To avoid injury, make sure the child is at a far and safe distance when the rehab buggy is

assembled and disassembled.

3.32. CAUTION!

The rehab buggy must be fully assembled before use. Should you encounter any

problems at this stage, please contact the Seller and the Manufacturer immediately.

3.33. CAUTION!

During assembly of the rehab buggy and when mounting the seat to the rehab buggy

frame, pay particular attention if the locking mechanism of the seat attachment to the rehab buggy frame

is properly closed because otherwise there is a serious risk of injury to the user!

Содержание Grizzly




























































Результаты поиска

Содержание Grizzly

Отзывы:

Похожие инструкции для Grizzly

Бренды по названию

Популярные бренды

MyWam Grizzly, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание Grizzly

Отзывы:

Похожие инструкции для Grizzly

Бренды по названию

Популярные бренды