v e r . 2 0 1 8 - 0 7 - 0 2
G r i z z l y
37
8.49. Protective barrier
(accessories; put in the place of the therapeutic table)
The Grizzly rehab buggy can be fitted with a safety barrier (see Fig.8.49.-A), which in the case of specific
recommendations prevents the child from falling forward.
The safety barrier is fitted with the same fixings as the therapeutic table, so you cannot use both of them at the same
time. The fixing the safety barrier or the therapeutic table are two plastic elements, with vertical holes, located on the
outer sides of the seat.
Fig.8.49.-A
Fig.8.49.-B
To install the safety barrier, press two buttons on the tubes
from the barrier and simultaneously push the tubes into the
vertical holes until they click (see Fig.8.49.-B). The railing will
be properly installed only when the tubes from the barrier are
properly inserted into the vertical fixing holes. This is
evidenced by a clear "click" sound coming from a correctly
fixing barrier.
To remove the barriers, press two buttons on tubes going
from the barrier and at the same time pull out the barrier.
8.50. Adjustable canopy with window
(accessories)
Fig.8.50.-A
The Grizzly rehab buggy can be fitted with an adjustable
canopy with a window that helps protect your child from
the sun or the rain. The elements of the canopy are:
a) rear arch of the canopy frame (see Fig.8.50.-A, no.
7)
b) front arch of the canopy
(see Fig.8.50.-A, no.
8)
c) canopy adjustment mechanism (right and left)
(see Fig.8.50.-A, no. 3
and 5)
d) two clasps with red buttons fixing the canopy
(see
Fig.8.50.-A, no. 4 and 6)
e) canopy
(see Fig.8.50.-A, no. 2)
f) window with a zipper
(see Fig.8.50.-A, no. 1)
g) rear canopy pocket
(see Fig.8.50.-A, no. 9)
The fixing of the adjustable canopy with a window are two plastic elements on the outer sides of the upper backrest.
These fixings are used to mount the canopy with a window.
To adjust the adjustable canopy with the window, place the backrest in an upright position (see 8.36. Angular
adjustment of the backrest.), and then collaterally slide the two clasps of the canopy to the fixings on the backrest
(see Fig.8.50.-B). To remove the adjustable canopy with the window, press two red buttons on the roof fixing clasps
and slide these clasps out of the fixings on the backrest.
