G r i z z l y
v e r . 2 0 1 8 - 0 7 - 0 2
36
8.48. Abduction & Stabilization harness (
accessories
)
Fig.8.48.-A
The restraint and stabilization belts (see Fig.8.48.-A) are used for additional stabilization
of the hips and prevention of the child from slipping off the rehab buggy. The correct way
to use them is to place such a clasp on the child's thigh so that their hips adheres as close
as possible to the backrest. This will ensure a healthier and more comfortable position of
the child in the rehab buggy.
The restraint and stabilization belts are fitted to the therapeutic seat in four places:
a) the back straps of the harness are fastened to the seat with two knobs, from the
bottom (see Fig.8.48.-B), the front straps of the harness are fastened to the front
openings of the seat combs (see Fig. 8.48.-C) to each of them using two plastic elements
(see from Fig.8.48.-D to Fig.8.48.-I).
To adjust the length of the restraint and stabilization belts, move the regulators on the front straps up or down (see
Fig.8.48.-G).
To put the restraint-stabilization belts on the child, place the child on the mounted straps, then wrap the child's leg
and fasten both clasps of the strap to both front harnesses.
In order to remove the restraint-stabilization harness from the child, unfasten the two clasps from the front straps.
Fig.8.48.-B
Fig.8.48.-C
Fig.8.48.-D
Fig.8.48.-E
Fig.8.48.-F
Fig.8.48.-G
Fig.8.48.-H
Fig.8.48.-I
