G r i z z l y
v e r . 2 0 1 8 - 0 7 - 0 2
32
Fig.8.40.-B
It is recommended to place the footrest plate at such a height so that the child's feet can
be placed on it and at the same time thighs of the child were located to the plane of the
seat in parallel.
As a rule, the footrest plate is in a horizontal position. However, during transportation,
storage, rehabilitation, getting on and getting out of the Grizzly rehab buggy, the footrest
plate must be folded and turned to the rack of the footrest plate (see Fig.8.40.-B).
8.41. Angular adjustment of footplate.
Fig.8.41.
To change the tilt angle of the footrest plate, slightly turn the two knobs on
either side of the footrest, then adjust the angle of inclination of the footrest
plate and screw both knobs back until the resistance is noticeable (see Fig.8.41.).
8.42. Angular adjustment mechanism for the whole footrest
Fig.8.42.
The mechanism is located in the front of the seat and connects it to the footrest frame.
There are two plastic black swivels with buttons in the middle (see Fig.8.42). This
mechanism is used to change the tilting angle of the footrest relative to the seat, allowing
to select the appropriate position out of the ten available.
8.43. Angular adjustment of the entire footrest.
Fig.8.43.
To change the angle of the footrest, press the angular adjustment mechanism buttons of
the footrest on both sides, then adjust the position and release the buttons (see
Fig.8.43.).
