MYTRIX Dreamweaver Скачать руководство пользователя страница 54

Страница: 54 / 56

Mytrix Technology -

http://www.mytrixtech.com

2014 Mytrix Technology

3. Do not touch the nozzles and heating plate in the process of printing or when they

are still hot, to avoid injury.

4. Do not repair, modify, dismantle the 3D printer, nor remove screws, it may cause

warranty invalidation.

5. Keep 3D printer and all accessories out of children’s reach.

6. When printing via USB, keep stable connection between the PC and the printer.

7. When connection error occurred while printing via PC, please stop printing, clean

up the heating platform and re-start.

8. Please do not move the dual extruder when the printer is working.

9. Do not rotate the extruder knobs too tight.

10. Please check the filament is adequate before printing.

Chapter 12 Maintenance

1. Clean extruder and nozzle frequently.

2. Oil the X/Y/Z axis in time.

3. Preheat extruder properly before loading filament.

4. Calibrate extruder and platform every time before printing.

5. Keep platform clean and empty when idle.

6. Keep printer away from sundries.

7. Keep printer clean and dry.

Содержание Dreamweaver













































Результаты поиска

Содержание Dreamweaver

Отзывы:

Похожие инструкции для Dreamweaver

Бренды по названию

Популярные бренды

MYTRIX Dreamweaver, Руководство пользователя

Результаты поиска

Содержание Dreamweaver

Отзывы:

Похожие инструкции для Dreamweaver

Бренды по названию

Популярные бренды