MYTRIX Dreamweaver, Руководство пользователя

Страница: 52 / 56

Mytrix Technology - http://www.mytrixtech.com
2014 Mytrix Technology
All rights reserved Third Version
50
Chapter 10 FAQ
1、Q: Got electrical shock when using the machine
The machine has a metal cabinet which comes with static electricity, it will not cause
harm to human body. The reason why it has static electricity is that the ground filament
has not been connected yet. To solve this problem:
1. Make sure the ground filament is set when laying the electric filament in the house.
2. Use another filament to connect to the machine metal cabinet (can be the bottom
under Z Axis), then connect the other end to a substantial metal object in the house, for
example the window.
2、Q：Paper is loosened and easy to be turned during printing
A
：
Possible causes
1. The distance between the printing platform and nozzle is too far away, it can be
adjusted by the four horizontal adjusting nuts. Make sure the distance is appropriate,
same as the thickness of a name card.
2. The temperature of the print platform is not high enough, the standard setting of the
temperature is about 75 if using PLA and 100 for ABS.
3. The print platform does not have the high temperature resistant adhesive, to
improve the engagement, high temperature resistant adhesive is recommended.
4. Cooling fan on the platform is turn on too early, unplug the interface, but do not