MYTORQ MY-TR, Руководство по эксплуатации, Страница: 35 / 46

Page 35 of 46
ELECTRIC
SCREWDIVERS
Data Log
➢ Data Log: When is checked, there are two ways to
automatically export Excel reports (instant archive, automatic archive).
⚫ When is selected, any data fastened will be automatically
exported to the bottom of . When the system passes the
integral time point, the form will be cleared to ensure sufficient memory
space.
⚫ When is selected, the data will be recorded in “seconds”
as set in and the report will be exported below .
Trend Setting: Time, Torque, Thread
Select one of the Time, Torque, and Thread from the pull-down menu.
It will show the graphic trend chart. (Refer to “TQC Trend Setting” )
NOTE: When changing the “Trend Setting”(T/Q/C) setting, the screen of the
chart will be clear and then display again after finished a new tighten.
C
D