myStart EBDSPIR-PRM-LV, Руководство по эксплуатации продукта, Страница: 1 / 8

Overview
The EBDSPIR-PRM-LV PIR (passive infrared) presence
detector provides automatic control of low voltage loads
including lighting and BMS systems with optional manual
control.
Functioning as a presence detector, the unit can turn lights
on when a room is occupied and off when the room is
empty. Optional settings allow lights to be turned off in
response to ambient daylight.
All functionality is fully programmable using an IR handset.
Three variants are available.
EBDSPIR-PRM-LV
Ceiling PIR presence/absence
detector 12-24V AC/DC
Features
Front features
Back features
Ceiling PIR presence/absence detector 12-24V AC/DC
EBDSPIR-PRM-LV
PIR Sensor
Detects movement within the unit’s detection range,
allowing load control in response to changes in occupancy.
IR Receiver
Receives control and programming commands from an
IR (infrared) handset.
Light Level Sensor
Measures the overall light level in the detection area
Status LEDs
The LED flashes R ed to indicate the following:
Power Input & Output Connector
Used to connect power to the unit and to connect a
switched load.
Switch Input Connector
Two input terminals can be used to manually override the
lights on or off.
Retaining Spring
Retaining Spring
Power Input &
Output
Connector
Switch Input
Connector
Sensor Lens
! " " # $ % & ' ( ( (
PIR Sensor
IR Receiver
Light Level Sensor
Status LEDs
Mounting Bezel
Product Guide