page 6 of 28
Control inputs/outputs etc.
12. MY-LINK input/output
When this DVD player is used in a system with other
Myryad MX-Series products (or Z-Series), all may be
joined together via My-Link. My-Link is a
communications bus that allows all the linked
components to operate together as a system and
distributes the remote commands received by any one to
each of the others.
The simplest function provided by the My-Link bus is that
all linked units will switch into or out of standby mode
when the processor or amplifier’s front panel or remote
control standby key is pressed.
The My-Link bus allows any linked product to be remote-
controlled via the MXV4000’s infra-red receiver - or vice-
versa.
The MXV4000 (or any other product on the My-Link bus)
can be controlled from a remote room via a suitable
interface to the My-Link bus.
Use a short RCA-to-RCA (phono-to-phono) interconnect
cable to connect from the MY-LINK IN socket on the
MXV4000 to the MY-LINK OUT socket on the processor
or amplifier. A second cable may then be run from the
MY-LINK OUT socket on MXV4000 to the MY-LINK IN
socket on, for example, a Myryad tuner – “daisy-chain”
fashion. Further compatible Myryad products can be
linked in the same way, running from the MY-LINK OUT
socket on the tuner. Inexpensive interconnects may be
used as the My-Link bus carries only control signals, not
audio, as these cables have no effect on sound quality.
The MXV4000 is Smart My-Link® compatible. When it is
linked to a Myryad Smart My-Link® Processor,
Preamplifier or Integrated Amplifier many more powerful
system features are available (see page 8).
13. RS232 CONTROL input
The MXV4000 can be connected to a home automation
system through this interface. Contact your Myryad
dealer or Armour Home Electronics Ltd. for details or
visit the Myryad website at www.myryad.co.uk.