© 2019 mPTech
. All rights reserved. HALO Q
13
•
[Screen saver] - Determine how long it takes for the screen to lock.
•
[LCD backlight] - Set the brightness and how long it takes for the screen to fade
out.
•
[Show date and time] - switches on/off displaying the date and time on the main
screen of the phone.
Call settings
Available in [Menu] > [Settings] > [Call settings] You can set the presentation of the
caller ID, call waiting, forwarding, call blocking and line change. In [Advanced settings]
you can set and edit the list of blocked phone numbers - [Blacklist], set the automatic
call duration reminder and select the SMS rejection mode and the method for
answering calls.
Call register
To view the call register select
[Menu]
>
[Call Register].
The following positions are
placed in there:
•
Dialled calls
•
Missed calls
•
Received calls
•
All calls
The positions are changed using the <Right> and <Left> buttons.
Configuration of the alarm
Enter: [Menu] > [Organizer] > [Alarm] Select any item in the list and press <OK>. You
can enable/disable the alarm, set the time of its activation, repeat (once, every day,
custom), select the alarm volume and sound, type of alarm (combinations of ringing
and vibration). To confirm alarm setting press <Save>.
Calculator
Enter [Menu] > [Calculator].
Basic arithmetic operations can be performed using the numeric keypad (typing
numbers, digits). Actions can be set using navigation buttons: <Up> - addition, <Down>
- subtraction, <Left> - multiplication and <Right> - division. To see the result press
<OK>.
Factory settings
To get back to factory settings enter [Menu] > [Settings] > [Restore factory settings],
input the phone password and confirm by pressing <OK>. Password required to restore
the factory settings is 1122.
Torch
To turn on the torch, slide the switch on the side of the phone's casing upwards and
the torch on the top of the phone's casing will turn on. Move the switch to the middle
position to turn off the torch.
Attention: The light emitted by the LED has a strong focus therefore it is unadvisable
to look directly into the light. Not following this instruction may cause damage to your
eyesight.
