Mynt3d Junior2, Руководство пользователя, Страница: 4 / 8

2
Operation Instructions
1. Press the power button for 3 seconds to initiate heating. Heat
indicator will be red.
2. When the heat indicator light turns green, press the filament load
button to start feeding. Load filament into the hole at the end of the
pen. Continue feeding until it extrudes out of the nozzle.
Press the load button again to stop extruding.
3. When finished, press the unload button to reverse filament out of
the pen automatically. Auto unload will stop after 15 seconds.
4. Press power button for 3 seconds to turn off power. Filament will
automatically be removed from pen.


3
seconds