Mylex Disk Array controller Software Kit 2.01, Руководство по установке и инструкция пользователя

Страница: 125 / 172

Manual No. 771929 A-1
A
P
P
E
N
D
I
C
E
S
A
Appendix A
SNMP Installation,
Operation & Definition
Introduction
The Global Array Manager includes a Simple Network Management
Protocol (SNMP) agent for the RAID controller and connected arrays. An
SNMP–based management application (also known as an SNMP manager)
can monitor and manage the disk arrays. An example of an SNMP
management application is Hewlett-Packard’s Open View. The SNMP agent
can be used to augment the Global Array Manager Client if you are already
running an SNMP management application at your site.
SNMP Installation Overview
The installation of the SNMP agent is accomplished in several phases:
• Installing the agent software on the server
• Placing a copy of the management information base (MIB) in a
directory which is accessible to the management application
• Compiling the MIB description file with the management application
SNMP Installation for NetWare
During installation of the Global Array Manager Server, the SNMP file was
copied to its appropriate directory as shown in the table below. The file can
also be copied to the server directory from a workstation’s floppy disk drive
(with the appropriate NetWare access rights to the server directory.)
Table A-1. NetWare SNMP File
Operating system Agent filename Server directory
NetWare GAMAGENT.NLM SYS:SYSTEM