Mylex Disk Array controller Software Kit 2.01, Руководство по установке и инструкция пользователя

Страница: 115 / 172

UnixWare
Manual No. 771929 5-11
5
U
N
I
X
W
A
R
E
Global Array Manager Server Software and
Utilities for UnixWare
Creating a Global Array Manager (GAM) Diskette for
UnixWare
Before installing the GAM Server for UnixWare, a diskette must be created
according to the instructions below.
This diskette will be used in the next section wherever instructed to insert the
“GAM Server diskette for UnixWare.”
1. Insert a DOS formatted diskette into drive A.
2. Insert the CD-ROM into the CD-ROM drive.
3. From the DOS prompt type
F:\gam\unixware\disk1\gamsuw a: <Enter>
where F: is the name of the CD-ROM drive.
4. You will get a message asking if you want the disk to be overwritten to
continue. Type Y for Yes and press <Enter>.
5. Label this disk as “GAM Server diskette for UnixWare” and save until
needed.
☛
Note
After creating this diskette, DOS is not able to read it.
Installing Global Array Manager Server Software and
Utilities
Use pkgadd to install the Global Array Manager Server software for
UnixWare. Complete the following procedure.
☛
Note
These instructions assume the installation diskette is
in disk drive 1. If a different source is used, substitute
the location for “diskette1” below.
1. Log in as root.
2. Insert the GAM Server diskette for UnixWare in the file server’s
diskette drive.