MYIRO myiro-9, Инструкция по эксплуатации

Страница: 39 / 44

Scan Measurement Chart Conditions
The MYIRO-9 can scan charts conforming to the following conditions:
• Even if paper conditions and chart layout conditions meet the conditions below, some charts may not be measurable.
When feeding test charts using MYIRO-9 alone
When using optional
Auto Sheet Feeder FD-A09
Paper width 45 to 330 mm 90 to 320 mm
Paper length 170 to 1500 mm 170 to 450 mm
Paper thickness 0.05 to 0.45 mm 0.08 to 0.25 mm *
1
Minimum patch size 6 × 6 mm
Maximum number of patches per page A4-size paper: 1394
A3-size paper: 2928
• Positioning markers are not necessary.
*1 When using optional Auto Sheet Feeder FD-A09, the maximum recommended number of loaded sheets is:
Normal paper (80 g/m 2 ): 100 sheets
Heavy paper (130 g/m 2 ): 70 sheets
The layout of the chart on the paper must conform to the following layout. (See below.)
Minimum leading margin 23 mm
Minimum tailing margin 33 mm
Minimum side margins 4 mm
Horizontal shift Within 150 mm of paper center line
Into MYIRO-9
Paper center line
Leading margin
Chart area
Chart width
Horizontal shift
Side margin
Side margin
Trailing margin
\
37