MYIRO myiro-9, Инструкция по эксплуатации

Страница: 14 / 44

Names and Functions of Parts
Bottom view Inside view
Front view Rear view
1 Cover
2 Paper guide mounting slots For attaching the Paper Guide.
3 Display panel Shows instrument settings, status, error messages, etc.
4 Up / down buttons For selecting items from the setting screen or making numerical settings.
5 button For confirming selection or settings.
6 (Return) button For entering the settings screen or returning from the setting screen.
7
Power button
For switching power on and off.
8
AC adapter input socket
For connecting to the AC adapter
9 LAN connection terminal For connecting the instrument to a wired network.
10 USB connection terminal For connecting the instrument to a computer via USB.
11 Auto Sheet Feeder alignment holes
12 Auto Sheet Feeder connector cover
13
Color measurement sensor unit
Moves back and forth during operation to scan the test chart.
14
Base mounting screws
These screws secure the instrument to its base. They can be loosened if necessary to
clear jammed paper (see p. 32) or for cleaning (see p. 35).
• Be sure that these screws are firmly tightened. If they are loose when
measurements are taken, measurement accuracy may suffer.
15 White calibration plate Used for performing white calibration.
12