Myenergi zappi Series, Руководство по эксплуатации и установке

Страница: 7 / 37

zappi 8 operation and installation manual
Operation
Display
Import / Export Power
The power being either imported or exported from or to the grid (kW). The
direction of the arrows indicate if the property is currently importing power (left)
or exporting power (right)
The size of arrows is proportion to the level of power. When the property is
neither importing or exporting power, the figure will be 0.0kW and there will no
animated arrows. The property is then said to be 'in balance'
House Load Power
The power that the property is currently using in kW
It does not include any surplus power being sent to the heater(s)
)
Status Text
The current status is displayed here (see Status Screens page 10)
Generation Power
The power being generated at this time in kW
Lock Icon
Operation lock is active
Date & Time
The current date and time
Mode Icons
These icons indicate that the import limiting is active (house) or the e-Sense input
is live (e)
zappi Icon
This
zappi
unit. If there are wavy lines above the icon, the unit is thermally
limiting (the output power will be temporarily reduced)
Charge Mode
Shows the selected Charging Mode; FAST, ECO or ECO+ (see Charging Modes page
12)
Charge Delivered to EV
The accumulated charge energy that has been sent to EV in this charge session
Current Charging Power
When the EV is charging, arrows will show here along with the charging power in
kW
Green Level of last charge
This is percentage of 'Green' energy for the last charge session, this is shown at
the end of a charge or when the EV is unplugged
12
11
10
12
10
11