Myenergi zappi Series, Руководство по эксплуатации и установке

Страница: 16 / 37

zappi operation and installation manual 17
Menus
Menus
Main Menu
Main Menu Options Description
Charge Log… Today…
Log of charge sessions
Yesterday…
Week…
Month…
Year…
Total…
Event Log… Today…
Log of events
Yesterday…
Week…
Custom Date…
Readings… READINGS 1/4 Status:
Current status of the unit
Exporting/Importing:
Power being imported or exported, from or to the grid
respectively
Charge Power:
Power level in Watts being supplied to the EV
Pilot(PWM):
Control Pilot PWM
Charge Current:
AC current supplied to the EV
Unit Temp:
Internal temperature of the
zappi
unit
READINGS 2/4 Voltage:
Supply voltage to the unit
Voltage Max:
Maximum supply voltage since switch-on
Voltage Min:
Minimum supply voltage since switch-on
Frequency:
Grid frequency
Exporting/Importing:
Power being imported or exported, from or to the grid
respectively
READINGS 3/4 Exporting/Importing:
Power being imported or exported, from or to the grid
respectively
Generation:
Power from the generator (if available)
Consumption:
Power consumed by the house (if available)
Diverting:
Total diverted power (inc. all devices)
Charge Power:
Current power being supplied to the EV
Charge Energy:
Energy supplied to EV during current charge session
Charge Time:
Duration of current charge session
Information… INFORMATION 1/2 Status:
Status of the unit
Serial No:
Serial number of the unit
Firmware:
Firmware version installed in the unit
Assembled:
Factory assembly date
Cal Date:
Calibration changed date
Power Fail:
Time and date of last supply failure
INFORMATION 2/2 Grid Sensor:
Grid current sensor source
Signal Quality:
RF signal reception quality
Last Fault:
Last recorded fault code
Fault Date:
Date and time of last recorded fault code
INFORMATION 3/3 Network ID:
Network information for this device when linked to
other devices using RF network (EU Models
only)
Device Address: