Myenergi ZAPPI-2H07TB-G, Руководство пользователя

Страница: 5 / 29

Page 5 of 29
1. Introduction
Thank you for choosing
zappi
. Of course, we think you have made an excellent choice and are sure you will be
incredibly happy with the features, benefits, and quality of your
myenergi
product.
These instructions will help you to familiarise yourself with the
zappi
. By reading the instructions, you will be
sure to get the maximum benefit from your 'eco-smart' device.
2. Safety
zappi
is an AC EV charger, intended to be installed in a fixed location and permanently connected to the AC
supply network. It is a Class 1 item of electrical equipment in accordance with IEC 61140.
The unit is designed for indoor or outdoor use at a location with restricted access and should be mounted
vertically either surface (wall) mounted or on the dedicated pole mount supplied separately by
myenergi
.
The device has been manufactured in accordance with the state of the art and the recognised safety standards,
however, incorrect operation or misuse may result in:
• Injury or death to the operator or third parties
• Damage to the device and other property of the operator
•
Inefficient operation of the device
All persons involved in commissioning, maintaining, and servicing the device must:
•
Be suitably qualified
• Have knowledge of and experience in dealing with electrical installations
•
Read and follow these operating instructions carefully
• Always disconnect the device from the supply before removing the cover
The device is not to be used by persons (including children) with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the device by a person responsible for their safety.
zappi
comes in either tethered or untethered variants. The untethered version should only be used with a
dedicated cable fitted with a Type 2 plug which is compliant with EN 62196-1 and EN 62196-2. Adaptors or
conversion adapters and cord extension sets are not allowed to be used.
Failure to install and operate the
zappi
in accordance with these instructions may damage the unit and
invalidate the manufacturer’s warranty.
3. Disposal
1
In accordance with European Directive 2002/96/EC on waste electrical and electronic equipment and its
implementation in national law, used electrical devices must be collected separately and recycled in an
environmentally responsible manner. Ensure that you return your used device to your dealer or obtain
information regarding a local, authorised collection and disposal system. Failure to comply with this EU
Directive may result in a negative impact on the environment.
4. Copyright
Copyright of these operating instructions remains with the manufacturer. Text and images correspond to the
technical level at the time of going to press. We reserve the right to make changes. The content of the operating
instructions shall not give rise to any claims on the part of the purchaser. We are grateful for any suggestions
for improvement and notices of errors in the operating instructions.
myenergi zappi
,
myenergi eddi
and
myenergi harvi
are registered trademarks of
myenergi
Ltd.