EVSE Test Box
EV charge point test aid
Operation Manual
my
energi
.uk
V 1.0 November 2018
Страница 1: ...EVSE Test Box EV charge point test aid Operation Manual myenergi uk V 1 0 November 2018 ...
Страница 2: ...2 Socket Use with a Type 2 plug zappi Test Terminals Connect the Electrical Tester to the respective terminals Note L2 L3 terminals are only available with a 3 phase zappi using the Type 2 socket Selector Switch Turn knob towards the desired mode or Description This EVSE test box can be used to test the zappi as well as other AC charge point EVSE products The box signals to the zappi that an EV is...
Страница 3: ...adequate connector type 1 or type 2 4 Set the EVSE test box to charging using the selector knob 5 Run the RCD test using your own electrical tester 6 At each tripping event reset the zappi by holding the Mode or exit button for 5s as indicated on the main screen zappi will automatically reset the next test will proceed 7 At the end of the test move the knob back to disconnected and disconnect the ...
Страница 4: ...myenergi uk 4 EVSE Test Box installer manual ...
