mychway MS-7006F, Руководство пользователя, Страница: 26 / 57

1. Please remove the cotton pad and clean the device with saline and keep it properly
stored after each operation.
2. Use a grounding pin and make sure the power socket of the device is properly
connected before each operation.
3. Ensure that the voltage of the device is appropriate. If the voltage of the local
power supply is unstable, we recommend that users increase to the matching power
voltage.
4. In order to ensure the therapeutic effect and normal service life expectancy of the
device, please use the specified accessories provided or recommended by the original
manufacturer.
5. The device should not be placed in wet environment or near water, nor should they
be directly exposed to sunlight.
6. Do not place the device near a strong heat source, because this may affect the life
and normal use of the device.
7. Before treatment, please remove all metal objects from the body first, so as to
avoid unexpected conditions and influence the curative effect.
8. Do not use on eyes, thyroid gland, parathyroid gland, testis, abdomen of pregnant
women and atrial pulse generator.
9. Patients who are suffering from illness should be consult with a doctor and gain
permission from the doctor before using.
10. Please turn off the power switch of the device, and ensure that the total power
supply of the device is turned off before the staff leaves after daily use, so as to
ensure the safety of the electrical products.
11. Use device or train device operators in strict accordance with instructions in the
user manual.
12. When taking other weight-loss drugs, it is recommended to stop taking them for 1
to 2 months before using this instrument. If you lose weight immediately, you should
extend the course of treatment.
13. Don't use the instrument with an empty stomach. After a full meal, wait at least 1
hour before a course of weight loss treatment.
14. When operating, the instrument should fully touch the skin to avoid uneven heat.
15. Start at the lowest level of energy at the beginning of the operation, then slowly
add up.
16. When receiving cryolipolysis fat-freezing treatment, it is required to apply 2
fat-freezing membrane on the treated area and dry skin should be avoided.
17. Clean the instrument with normal saline after operation to ensure its cleanliness
and hygiene and prolong its service life.
18. The twisting knob is for controlling vacuum suction levels. By twisting, it adjusts
suction level of (vacuum&RF handle, vacuum cryolipolysis).
19. It is advised not to use vacuum cryolipolysis fat-freezing and 40K, RF at the same
time. When conducting 40K and RF treatment, you need to wait for 2 weeks or so to
conduct vacuum cryolipolysis fat-freezing treatment, or when conducting vacuum
cryolipolysis fat-freezing treatment, you need to wait for around 28 days before you
can conduct 40K and RF treatment.