Mychef iBAKE Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 96

background image

mychefcooking.com

PRODUCT MANUAL iBAKE MAX - DT.MP.IBM.2202.2

5

1.

INTRODUCTION

This  manual  has  been  carefully  prepared  and  revised  in  order  to  provide  reliable
information  and  assistance  for  correct  installation,  use  and  maintenance  that  will  ensure
proper operation and prolong the life of the oven. This manual is divided into 3 parts, the
first part dedicated to the installation of the appliance at the working point, the second part
to the use, and the third part focused on the cleaning and maintenance of the oven.

Before carrying out any intervention or use of the appliance, it is necessary
to read this manual carefully and completely.

The manufacturer disclaims all liability, express or implied, for any errors or omissions it may
contain.

-

The oven must not be used by personnel who have not received any training, skills
or experience necessary for the correct operation of the appliance. Do not allow
children to use or play with the appliance.

-

The owner of the appliance is obliged to have this manual read by the personnel in
charge of its use and maintenance, as well as to keep this manual in a safe place so
that it can be used by all users of the appliance and for future reference. If the
appliance is sold to other persons, this manual must be handed over to them.

-

This oven must only be used for its intended purpose, i.e. cooking, heating,
regenerating or dehydrating food. Any other use may be dangerous and may result
in personal injury and damage to property.

-

The appliance is shipped from the factory once it has been calibrated and passed
rigorous quality and safety tests to ensure its correct operation.

The manufacturer shall disclaim any liability for problems caused by
improper installation, modification, misuse, or improper maintenance.

«
...
3
4
5
6
7
...
»

Содержание iBAKE

































































































Отзывы:

Нет отзывов

Похожие инструкции для iBAKE

Бренд: Dacor Страницы: 2

Бренд: GE Страницы: 40

Бренд: GE Страницы: 40

PT925SNSS - Profile 30" SC Convection Ovens

Бренд: GE Страницы: 68

Бренд: NAPCO Страницы: 19

Бренд: Oster Страницы: 2

Бренд: Rinnai Страницы: 40

Бренд: Jenn-Air Страницы: 2

Бренд: Vitek Страницы: 56

Бренд: TurboChef Страницы: 107

TSCLTRDG1-AFS-026

Бренд: Calphalon Страницы: 17

Бренд: Gaggenau Страницы: 28

Бренд: Tisira Страницы: 16

Бренд: Galanz Страницы: 10

MFO 66 P K CD 765C

Бренд: VALBERG Страницы: 67

MICROONDAS USK MW 26146

Бренд: Kalorik Страницы: 82

Бренд: GVA Страницы: 16

Бренд: Magic Chef Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды