210208_A
mychefcooking.com
16
PRODUCT MANUAL EVOLINE - DT.MP.EV.2103.2
Figure 7. Error screen for models without humidity
The following table shows the errors:
Error
Reason
Solution
Er 01
Chamber probe
short circuit
The system has detected that the chamber probe cable has a
short circuit. Call an after-sales service provider for repair.
Er 02
Chamber probe
open circuit
The system has detected that the chamber probe cable has been
cut or disconnected. Call an after-sales service provider for repair.
Er 16
Internal error
The system has detected an internal error. Disconnect the device
from the power source, wait one minute, and connect it again. If
this does not work, call an aftersales service provider for repair.
Er 17
E01+E16
Both errors E01 and E16 have occurred at the same time.
Er 18
E02+E16
Both errors E02 and E16 have occurred at the same time.
Table 7. Errors and possible solutions
Once the appliance has detected a serious error, it will not function normally until it is
repaired.
The appliance runs automatic checks which may result in it turning off to prevent a serious
error. Turn it on as usual.