
mychefcooking.com
PRODUCT MANUAL COOK UP | COOK PRO - DT.MP.CK.2102.2
53
8.1.2.
Suction
The piece that separates the cooking chamber with the fan and the heating element can be
removed to clean that area. In order to remove the guard, the guard screw (A) must be
unscrewed and the guard piece (B) must be lifted.
Figure 44. Suction plate fixing screws for Cook Pro and Cook Up
Once the part has been removed, cleaning can be done either manually or automatically.
Extreme care must be taken when cleaning this part of the oven. Leave
the door ajar and wait until the chamber fan stops.
When this process has been completed, the chamber fan suction part must be replaced in
reverse.
8.1.3.
Door gasket
Once the cleaning of the chamber has been completed, the washing process will continue
with the seal that ensures the watertightness of the chamber. It is important that this part of
the oven is clean and does not have any pieces of food embedded in it so that it can seal
the chamber well and heat, water, or steam cannot escape when it is in operation.
To clean this rubber seal, a cloth soaked in water and a little bit of dishwasher is enough.
Then the whole area is rinsed out and dried well.
The gasket should not be removed from its contour for cleaning, it should only be removed
when it needs to be replaced.
A
B
B