MyBinding Challenge Spartan 150M, Инструкция по эксплуатации

Страница: 21 / 22

9.0 Safety Systems Test
20
9.0 Safety Systems Test
Machine manufacturer CHALLENGE Model SPARTAN 150 M
Serial Number __________________
Frequency of test: THESE TESTS SHOULD BE PERFORMED WEEKLY.
Test #1: Move the cutting lever to its right-most position. Move the knife latch to the right and the
cutting lever slightly to the left. Attempt to lift the hood. The machine requires service if the hood lifts
more than approximately 1 inch. If the machine fails this test, do not use it until a qualified technician
has serviced it. The knife interlock requires servicing.
Test #2: Move the lever arm to the left and release it at various locations. The lever should not move
while it is not being held. If the lever moves after release, do not use it until a qualified technician has
serviced it. The knife bar gibs require adjustment.