Heart rate sensor
Operation Manual
Warranty
Please be sure to read this manual before using the product.
This product is not a medical equipment. It is not an instrument for the
prevention of disease.
Please prepare an electrode pad when using this product.
Please do not duplicate, reprint, or reform this product, including accessories without permissio
For the purpose of product improvement specifications of this product including accessories may change without prior
notice.
The life expectancy of this product is six years
Never detach the seal that is attached to sensor body. Inability to confirm the contents of the seal can lead to punishment
following the Radio Law, or you may be refused product r
Safety Precautions
Please read carefully to use the product correctly and safely.
Before Using The Product
Battery will drain even when power is OFF.
It is necessary to ensure that a device
communicates with the product corresponds
the
Bluetooth
®
v4.0.
Prepare either of the electrode pads on the right.
LED Lamp Display
●
Green Light ON
＊
1
Cardiac waveform mode start up or measurement in progress.
Starting RR interval
●
Green Light Blink
＊
1
＊
2
RR interval mode measurement in progress
(Biological Signal present
●
Yellow Light ON
Starting Setting mode
●
OFF
Power Off
＊
1
Displays only for 60 seconds after the power button is pressed, and intermittent lighting every 5 seconds thereafter.
intermittent lighting, and displays for 60 seconds operating state
※
When disconnecting micro-USB cable from the sensor, the LED Lamp
WARNING
NEVER attach this product to the body during charging. There is a
Please do not use (including health appliances) medical equipment that could be sensitive to electromagnetic wave, such as
implantable cardioverter defibrillators and implantable cardiac pacemakers.
That may cause malfunctioning o
instruments.
This product has a built-in lithium-ion battery
fire, or subject it to violent impact. That may cause of overheating, rupture or ignition of the battery.
If you feel heating or abnormal odor when using, charging or storage of this product, please disconnect it from the
surrounding and stop using it.
CAUTION
Please do not use for any purpose other than the originally intended as that may cause damage to the product.
Please store in a place out of the reach of children.
micro-USB Please connect or disconnect the cable holding the sleeve portion with a dry han
The set includes:
Heart rate sensor WHS-2 1unit, micro-USB cable
Thank you for purchasing our products.
This product is a
Bluetooth
®
Smart heart rate sensor of the type used by pasting directly unto the chest of a person using the
electrode pad.
It can detect heart rate (RR interval or cardiac waveform), body surface temperature and three
By utilizing relevant applications installed on smart phones and tablets, it is possible to observe daily biological information.
― Electrode Specification ―
1
Heart rate sensor
WHS-2
Warranty
using the product.
not a medical equipment. It is not an instrument for the purpose of diagnosis, treatment, or
Please prepare an electrode pad when using this product. [Recommended
：
myBeat Disposable electrode
Please do not duplicate, reprint, or reform this product, including accessories without permissio
For the purpose of product improvement specifications of this product including accessories may change without prior
six years
.
Never detach the seal that is attached to sensor body. Inability to confirm the contents of the seal can lead to punishment
, or you may be refused product repair or warranty.
Please read carefully to use the product correctly and safely.
Battery will drain even when power is OFF.
After unwrapping the product, please charge the battery immediately.
device that
corresponds to
the right.
waveform mode start up or measurement in progress.
RR interval mode (No Biological Signal)
mode measurement in progress
(Biological Signal present)
●
Green Fast Blink
＊
1
＊
3
Biological Signal Saturation
Starting Setting mode
●
Blue Light ON
Charging Battery
●
Red Light Blink or Red Light ON
Displays only for 60 seconds after the power button is pressed, and intermittent lighting every 5 seconds thereafter.
operating state again.
＊
2
Lighting once every 2seconds.
＊
3
Lighting
USB cable from the sensor, the LED Lamp may blink for a moment.
NEVER attach this product to the body during charging. There is a risk of electric shock.
Please do not use (including health appliances) medical equipment that could be sensitive to electromagnetic wave, such as
implantable cardioverter defibrillators and implantable cardiac pacemakers.
That may cause malfunctioning o
ion battery.
Please do not wet the product with water and other liquids, bring it close to
fire, or subject it to violent impact. That may cause of overheating, rupture or ignition of the battery.
you feel heating or abnormal odor when using, charging or storage of this product, please disconnect it from the
Please do not use for any purpose other than the originally intended as that may cause damage to the product.
Please store in a place out of the reach of children.
USB Please connect or disconnect the cable holding the sleeve portion with a dry hand.
(for charging) 1pc, Storage bag 1pc, myBeat Disposable electrode 1pc, Operation Manual 1pc
Smart heart rate sensor of the type used by pasting directly unto the chest of a person using the
It can detect heart rate (RR interval or cardiac waveform), body surface temperature and three-axis acceleration of a person.
levant applications installed on smart phones and tablets, it is possible to observe daily biological information.
a
.
b.
電池が
型式
S/N
MADE IN JAPAN
― Electrode Specification ―
15
～
30mm
Single Type
20mm
Hook
Electrode Part
purpose of diagnosis, treatment, or
myBeat Disposable electrode]
Please do not duplicate, reprint, or reform this product, including accessories without permission.
For the purpose of product improvement specifications of this product including accessories may change without prior
Never detach the seal that is attached to sensor body. Inability to confirm the contents of the seal can lead to punishment
charge the battery immediately.
Biological Signal Saturation
Charging Battery
Red Light Blink or Red Light ON
Battery is Low
Displays only for 60 seconds after the power button is pressed, and intermittent lighting every 5 seconds thereafter.
When you press the power switch to
Lighting 5 times every 2seconds.
Please do not use (including health appliances) medical equipment that could be sensitive to electromagnetic wave, such as
implantable cardioverter defibrillators and implantable cardiac pacemakers.
That may cause malfunctioning of such
Please do not wet the product with water and other liquids, bring it close to
fire, or subject it to violent impact. That may cause of overheating, rupture or ignition of the battery.
you feel heating or abnormal odor when using, charging or storage of this product, please disconnect it from the
Please do not use for any purpose other than the originally intended as that may cause damage to the product.
Sleeve
1pc, Storage bag 1pc, myBeat Disposable electrode 1pc, Operation Manual 1pc
Smart heart rate sensor of the type used by pasting directly unto the chest of a person using the
axis acceleration of a person.
levant applications installed on smart phones and tablets, it is possible to observe daily biological information.
a. LED Lamp
b. Power Button
c. Electrode pad
Mounting hook
R
123-XX4567
が切れたら早めに充電してください
型式 WHS-2
N 0040000001
MADE IN JAPAN
c.
Pair Type
Do not Overlap
15
～
30mm
Electrode Part
