My Urban Greenhouse HomeGro RDWC Скачать руководство пользователя страница 1

        HomeGro RDWC User Guide 

Adding Media 

Every HomeGro RDWC system comes with 1 
gallon of rinsed Hydroton ready to plant.  This 
amount will perfectly fill your 4 net pots when 
your plants are prepared.   

Fill each of the plastic net pots with the chosen 
media, leaving room for the foam disks 
provided to sit level with the lip of the pots.  

Transplanting Clones/Young Plants

 

The HomeGro RDWC system is designed to 
grow young plants to harvest.  Plants must have 
established roots prior to planting in the 
HomeGro RDWC.  You can purchase young 
plants at most dispensaries.   

If starting from seed, you will need to sprout 
the seeds outside of the system and maintain 
the plants until they are well established.   

Before transplanting into the HomeGro system, 
plants must be clean of any soil or organic 
material. To clean roots, carefully remove the 
plants from their container and submerge the 
root system in a bucket or large bowl full of 
water.  By slowly dunking the roots repeatedly 
and lightly massaging the soil, you can free the 
roots from soil without damaging the root 
system.  Be careful not to damage the root 
system with excessive or aggressive handling 
during the transplanting process. 

Locate the black net pots, Hydroton, and 5” 
foam disks.  Hold one plant in the center of the 
net pot so the lowest branch is above the rim of 
the net pot.  Pour Hydroton media into the net 
pot, leaving about ½” at the top for the foam 
disk to sit inside the net pot and support the 
main stem.  Place the planted net pot in the lid 
of the HomeGro RDWC and repeat until all 4 net 
pots are planted. 

 

Water Quality and Fill Levels 

Pure, clean water is a huge factor in the success 
of your hydroponic grow.  The best 
recommendation we can make is that you find a 
local company to purchase jugs of filtered water 
to ensure you’re starting your grow with high 
quality, clean water.   

The quality of your tap water will be different 
depending on your geographic location and 
water source.  Many water utility companies 
publish their pH and EC/TDS values online so 
you can quickly verify your local water content.  
If your tap water is outside the desired range 
listed below, be sure you pre-filter your water 
or buy clean filtered water locally. 

Desired pH: Between 6.0 and 7.0 

Desired EC/TDS: Between 0 and 400 ppm 

Required water for initial fill: 5 gallons 

Fill the water reservoir to the top of the misting 
manifold (about 5 gallons). As the plants grow, 
they will consume the water. Check the 
reservoir at least once per week.  Add water as 
needed to keep the water level above the top 
of the pump. Typically, growers will add an 
average of 2-3 gallons of water once per week. 

Adding Nutrients 

Once the Homegro RDWC is assembled with 
water and plants added, growers need to add 
nutrients to the water to begin feeding the 
plants.  The HomeGro system comes with 2 
pouches of powdered nutrients: MaxiGro for 
the vegetative stage and MaxiBloom for the 
bloom stage.  These nutrient powders are 
specially formulated for high quality yields and 
ease of use.   

Each pouch of nutrients comes with a plastic 
scoop.  The large side is 1 Tablespoon.  The 

Отзывы: