MVTV Wireless ATSC Digital Receiver, Руководство пользователя

Страница: 25 / 35

Advanced Operations
3. Wakeup Channel: Press [OK] to enter the channel list, and highlight the channel you want to activate with
the timer with [CH
▲
/
▼
]. Select with [OK] to confirm.
4. Wakeup Date: Use the numeric keypad on your remote to input the date on which the timer will activate.
5. On Time: Use the numeric keypad on your remote to input the time at which the timer will activate. At the
specified date and time, the STB will begin to play or record the channel selected for Wakeup Channel.
6. Duration: This is the length of time which the unit will play or record the set channel when the timer is
activated. The minimum duration unit is one minute.
Once you are finished, navigate to [Save] and select with [OK] to confirm your settings. Press [Cancel] to leave
the Time Setting menu without saving your settings.
4.6. Parental Lock
In this menu, you can set a password for anyone who wishes to operate the Installation menu. You can also
set a password to lock channels. Before opening this menu, you must input the current password for the STB
using the numeric keypad on the remote . The default password is 0000 . Once the correct password is
entered, the menu will open and you will be able to change the following settings:
1. Menu Lock: If Menu Lock is set to Yes, then you will need to enter a password every time you open the
Main Menu. If set to No, then you will not need a password to access the Main Menu.
Figure 15: The Timer Settings menu
21 | P a g e