MVTV Wireless ATSC Digital Receiver, Руководство пользователя

Страница: 15 / 35

Basic Operations
To switch between Favorite Groups:
1. Press [FAV] while watching live TV to open the Favorite window.
2. Navigate your Favorite Groups using [CH
▲
/
▼
] and press [OK] to open the channel list of the
highlighted group.
3. With [VOL ◄ / ► ], you can switch between the complete channel list (All TV) and each Favorite Group.
To switch to a channel, navigate to it with [CH ▲ / ▼ ] and select it with [OK].
4. Press [BACK] to close the Favorite Group window.
To rename your Favorite Groups:
1. Open the Main Menu by pressing [MENU] and navigate to System Setup > Favorite (keep pressing [CH
▼ ] until the item Favorite is visible, and press [OK] to open the menu).
2. Navigate to the Favorite Group you wish to edit with [CH ▲ / ▼ ], and select it with either [VOL ◄ / ► ] or
[OK] to open the Rename window.
3. Input letters and numbers by using the on-screen keyboard or the numeric keypad on your remote.
Press [Yellow/AUDIO] to toggle Caps, and [Red/ZOOM] to delete characters. Press [Blue/CC] or highlight
the OK button and select with [OK] when you are done entering the new name to return to the Rename
menu.
4. Exit the Rename menu with [BACK] or [MENU] when you are finished.
4. Recording Live Video
In TV mode, pressing the [REC
●
] button will open a dialog asking if you would like to record the current program.
Select Yes to begin recording. While the STB is recording, the uppermost status indicator LED on the front of
the STB will show a solid red light. You must have a Verimatrix smartcard and a USB storage device inserted
into the unit in order to enable recording. PVR functionality requires an active subscription from your service
provider.
While recording a program, pressing the [STOP
■
] button will open a window asking: “Stop recording: [Name
of Channel]?”. Select Yes to end recording, or No to close the window.
You may also set timers for recording future programs in the EPG or the Timer Settings menu. In the EPG,
pressing [Red/ZOOM] while highlight a program will bring up a Timer window for that program (you can also
reach this window by pressing [Red/ZOOM] in a program’s Information window in the EPG). In the Timer
Settings menu, you can change currently scheduled timers, as well as create new timers manually (up to 8
timers total are supported). For how to configure timer settings, look in III. Advanced Functions under 4.5
Timer Settings .
4.1. Dual Tuning Capabilities
Your STB has two ATSC tuners, allowing you to watch one program live while simultaneously recording
another program.
11 | P a g e