background image

PR

IMO

 MEAT SLICER

S        

PS-10 12 12D 12DQ

USER MANUAL

PS-12D

PS-10

PS-12

PS-12DQ

3560 NW 56th St. 

Fort Lauderdale, FL 33309 USA

 

Telephone: (786) 600-4687 
Toll Free Telephone:  1-844-218-8477 
Fax: (786) 661-4100
Email: [email protected]

5659 Royalmount Ave.

Montreal, QC H4P2P9

 CANADA

Telephone: (514) 737-9701

Toll Free Telephone: 1-888-275-4538

 

Fax: (514) 342-3854

For service call 1-888-275-4538

3560 NW 56th St. 

Fort Lauderdale, FL 33309 USA

 

Telephone: (786) 600-4687 
Toll Free Telephone:  1-844-218-8477 
Fax: (786) 661-4100
Email: [email protected]

5659 Royalmount Ave.

Montreal, QC H4P2P9

 CANADA

Telephone: (514) 737-9701

Toll Free Telephone: 1-888-275-4538

 

Fax: (514) 342-3854

For service call 1-888-275-4538

3560 NW 56th St. 

Fort Lauderdale, FL 33309 USA

 

Telephone: (786) 600-4687 
Toll Free Telephone:  1-844-218-8477 
Fax: (786) 661-4100
Email: [email protected]

5659 Royalmount Ave.

Montreal, QC H4P2P9

 CANADA

Telephone: (514) 737-9701

Toll Free Telephone: 1-888-275-4538

 

Fax: (514) 342-3854

For service call 1-888-275-4538

3560 NW 56th St. 

Fort Lauderdale, FL 33309 USA

 

Telephone: (786) 600-4687 
Toll Free Telephone:  1-844-218-8477 
Fax: (786) 661-4100
Email: [email protected]

5659 Royalmount Ave.

Montreal, QC H4P2P9

 CANADA

Telephone: (514) 737-9701

Toll Free Telephone: 1-888-275-4538

 

Fax: (514) 342-3854

For service call 1-888-275-4538

Содержание Primo PS-10








Отзывы: